Shift Resources

** PLEASE DESCRIBE THIS IMAGE **Cable Diagrams

Shift Animations

unisonUnison
independentIndependent

Shift Assemblies

Our shifting assemblies are built with ruggedness that you don't often find these days. They are designed to function in sawmill environment day in and day in a out for decades with little to no need for service. They use the same delrin ® bearings that are common to all of our sliding products, allowing a quick wipe down with solvent to loosen the sawdust, and you are done! They come with everything need to get you up and running quickly and can be ordered in custom lengths, the standard being 48". The units work very well even in the harshest of environments and can handle the stresses produced by vertical edgers.

Applications include: board edgers, vertical and horizontal and any other application that requires linear positioning of a laser for alignment.

SA-001 Unison Shift Assembly

The SA-001 unison shift assembly is what is often referred to as "equidistant". When one saw moves, the opposite saw moves with it, either apart, or together.

Mounting Bolts Spacing

  • End plates, 2 ea 5/16" thru-bolts, 2.750" spacing

  • End plate hole distance, same as ordered shaft length

Lengths Available:

  • 24" up to 72"

  • Standard length 48" unless otherwise requested

  • Lengths over 48" will incur additional per foot charges

Included Installation Parts:

  • 4 pcs Swivel block (routing) pullies

  • 4- 5/16 x 1.5" mounting bolts with washers and nuts

  • 2 pcs cable clamps 1/8" ac

  • 50' ac cable

* You can also add an SA-009 stationary bracket to allow for a stationary saw. ** PLEASE DESCRIBE THIS IMAGE **

SA-002 Independant Shift Assembly

The SA-002 independant shift assembly is just that, configured for independant saws. Both saws can be moved seperately.

  • Mounting Bolts Spacing

  • End plates, 2 ea 5/16" thru-bolts, 2.750" spacing

  • End plate hole distance, same as ordered shaft length

Lengths Available:

  • 24" up to 72"

  • Standard length 48" unless otherwise requested

  • Lengths over 48" will incur additional per foot charges

Included Installation Parts:

  • 6 pcs Swivel block (routing) pullies

  • 4- 5/16 x 1.5" mounting bolts with washers and nuts

  • 4 pcs cable clamps 1/8" ac

  • 2 pcs 50' ac cable

* You can also add an SA-009 stationary bracket to allow for a stationary saw. ** PLEASE DESCRIBE THIS IMAGE **